Product Overview
 3810R (3610R) series of angular travel all-electronic electric actuator, AC220 single-phase AC power supply as a driving power, directly from the DCS, PLC system or adjust the instrument operator DC4 ~ 20mA, DC0 ~ 10mA or DC1 ~ 5V control signal to run, to angular displacement (0 ~ 90o) movement of the all-electronic actuator. The electronic control unit is equipped with state-of-the-art hybrid integrated circuits, designed in a box shape, with complete protection functions, field control or remote control, and sealed with resin. The drive motor adopts AC reversible motor, and the feedback quantity detection adopts high performance conductive plastic potentiometer, which is a high reliability economic type product with 1/250 resolution ability. The actuator is equipped with a variety of motion conversion functions as well as the opening signal function and manual function.
 

Features
 1, The actuator design has a servo system (no need to reprovision servo amplifier), just access DC4 ~ 20mA (or DC1 ~ 5V) signal and AC220V single-phase power to work. Built-in terminals, wiring is very simple and convenient The 
 2, The key components of the actuator - the controller, using the most advanced hybrid integrated circuit, sealed with resin casting, shape for the box-like, small size, high reliability. 
 3, The drive volume of the feedback detection using high-performance conductive plastic potentiometer, resolution <0.4%. 
 4, With self-diagnostic function, when a failure occurs, the controller will immediately send an indicator light signal. 
 5, With the state selector switch can be set off the signal, (spool is fully open, fully closed or self-locking state). 
 6, With the state selection switch can be set (positive and negative action). 
 7, With the state selector switch can be set to input signal (DC4 ~ 20mA or DC1 ~ 5V). 
 8, Adjust the work of zero (starting point) and travel (end) is simple. 
 9, When the sudden power failure, to ensure that the spool self-locking. 
 10, The use of synchronous belt drive, effectively reducing the noise. 
 11, The delay protection function, the rated load, the state can be self-locking; failure occurs, can immediately start protection, and reverse operation to cancel the delay protection.

 The Main Technical Parameters

 The External Wiring
 Input / output signal should be shielded cable. The power cord must not share a cable with the signal cable

 Environmental Conditions

Performance Parameters